- Cut off the water supply under the sink.
- Open the faucet to releave and water still under pressure between the cut-off values and the faucet.
- Most handles are attached to the faucet with a screw. Unscrew the handle to the faucet.
- If there is a large metal nut holding all the internal parts in place and it is loose, you may have just found your problem. If not you need to remove all the other little pieces.
- VERY IMPORTANT: Make sure you note the order you are taking them out in. You need to put them back in the same order.
- Replace any worn out rubber o-rings, springs, and washers you find.
- Put all the parts back in the reverse order you took them out in. Turn on the cut-off valves under your sink, and test your faucet.
- It may take a second for the water to come back up through your hoses so you can expect some air at first.
Hopefully this fixes your leaking faucet problem. If you couldn't get it to work, we have a bunch of kitchen faucets and bathroom faucets that we guarantee will not drip for many years
No comments:
Post a Comment